RSS Feed

Tag Archives: Desk

Brown-Saltman Desk And Chair Completed

Posted on
img_3116

This set was in pretty rough shape!

You might remember me blogging about this desk sometime back. Our friend Vic allowed us to buy it because she wanted it to be restored. Though this set needed a lot of work, it had to be done. Brown-Saltman pieces are hard to come by and deserve every chance at becoming new again.  The first thing I had to deal with was the re-veneer of the top of the desk and drawer fronts.

IMG_1738

The top had burns, water damage, stains and chunks of wood missing.

Since the surface of this desk had wood loss in some areas, I had to fill it before I re-veneered it. You might be saying what should I use for a filler…….Bondo. This stuff is a great filler for projects like these.

IMG_1749

Here are the pieces with bondo applied and drying in the sun. Once the bondo is dry I will sand it flush with the surrounding surfaces.

The next step is to rough cut the veneer with excess to allow for trimming and adjustments. Once you apply the veneer glue to the under surface of the veneer and the surface of the desk and those surfaces come in contact, you will not be able to separate them again.

IMG_1751

Here is an example of a process used when applying veneer. This is a great help to make sure a good fit. (click)

Once I applied the new veneer I trimmed off the excess and light sanded the edge and all surfaces to prepare for stain.

IMG_4676

Next step is to apply the Heywood Wakefield champagne stain. The original look of these desks had a pickled finish. I am not too keen on that finish so I changed it up!

After 4 coats of the Heywood Wakefield stain the desk was ready for re-assembly.

IMG_4678

Here they are drying in the late afternoon sun.

The chair was refinished the same way as the rest of the desk, once it was done I sent it over to Bill at B&T Upholstery to recover it in some fantastic teal frieze fabric, similar to the upholstery on our famous pink wing chair. Here are the results:

IMG_4496

All I can say is WOW! Thanks Bill, it looks great!

Now with the chair done and the desk re-assembled it, is now time to move it into our bedroom so Mel has a work station when she needs to work. We are pleased with the final results and will enjoy this piece for years to come.

IMG_4508

As you can see, we had a piece of glass cut for the top to safeguard it from damage.

IMG_4520

IMG_4509

IMG_4521

%d bloggers like this: