RSS Feed

Tag Archives: vintage barstools

Amazing Bar with Frederick Weinberg Stools

IMG_6966

As usual, I was cruising Craigslist and came across this set last night. I noticed it had been on Craigslist for a couple days, and I thought I would just check to see if they still had it.

IMG_6964

I assumed since it had been on there for two days that someone would have snatched it. We got a call this morning from the owner who stated she still had it. We jumped in the car and shot on over.

IMG_6958

The thing that drew us to this bar are the cut outs in the front. The owner said it used to have colored plexiglass that was lit from behind. She said it was amazing when it was lit.

IMG_6961

This bar will need a 100 point restoration. Since the Formica is chipped, I plan to redo the formica in black. That will go better with the animal print vinyl instead of the faux marble top.

IMG_6972

I also plan to replace the silverfish finish on the foot rest area with black formica.

IMG_6973

I might have to reinforce the bottom as well.

IMG_6971

The shelf is at an angle so the alcohol labels can face up towards you, cool idea!

IMG_6959

This bar has this cool little ornament on the front with a small chain draped across the front.

IMG_6957

I am pretty sure these are Frederick Weinberg from what I could research online.

IMG_6968

These stools don’t match the bar very well with the animal pattern they have on them now. I will try to find a similar cheetah pattern to recover the seats in.

IMG_6951

This bar and stool set is now my next project. I am excited to see how it turns out. We have a bar in our living room that will be put into the shop since we snagged this one.

IMG_6265

We try to upgrade our collection as we go along. This bar will make someone very happy, I am sure. It has served us well. Below are the bars we have owned over the years.

IMG_3993

This swanky diamond bar was so cool with it’s two tier top. It had such an atomic feel to it. This is now sold.

IMG_6789

This bar is the ultra rare Expando bar. We sold it recently to a lady in L.A. She was so pleased to get it.

IMG_5071

We sold this 1963 Tropical Sun Company tiki bar at our grand opening, it sold in less than an hour!

IMG_3960

This Art Deco bar was fantastic! It reminded us of an early jukebox because of how the front corners lighted up when the door was opened. This is now sold.

IMG_5531

This wrap round bamboo bar didn’t last long in our booth. It has such cool simplicity too it.

IMG_5921

This aqua bar was so awesome. We drove all the way to Fresno to get it. Now it is in someones home being enjoyed!

IMG_3671

This is just a swanky 70’s bar. It’s now sold.

IMG_3369

This tiki bar has already sold. We think it might have been a Paul Frankl, but we could not substantiate it’s pedigree.

IMG_6899

This Tiki bar is currently in the process of being restored and will be in our shop sometime soon.

img_1239

Here is the grand server that we still own and use today!

atomic_bar1

This is the first bar we ever bought and restored. We purchased this one in the early 2000’s (sorry for quality of picture).

IMG_5437

Of course our beloved and rare Witco Tahiti Bar that we will be buried with, ha ha. We think a bar is a necessary piece to have in a home for entertaining. We think society needs more reasons to socialize with neighbors and friends, and what a better way to do it than sipping a drink at your own bar.

Advertisements

1960’s COSCO Hourglass Counter Stool Restoration

cos

IMG_6550

I drove down to Manteca, California a few months back because we needed some stools for our kitchen counter. I had been wanting to get my hands on a couple of vintage Cosco stools and this was my opportunity.

IMG_6554

The metal parts of the stools were in rough shape. There was a lot of surface rust on the chrome, but I have a trick for that!

IMG_6557

The first thing I had to do was separate the upholstered backrest and seat portions from the metal frame.

IMG_6571

I separated the fabric from the cushions. Not pretty, but it will be recovered soon!

IMG_6559

Here is the bottom of the seat cushion of the stool

IMG_6558

Here is the seat bottom frame. This chair has an archaic bearing system. It is made up of metal bearings with wood spacers. They sit loosely in the bottom seat pan….crazy!

IMG_6561

Next, I had to prep the metal seat backs and bottoms. I decided to spray them a cream color.

IMG_6562

Once they were sprayed I hung them with wires until they were dry.

IMG_6564

Then, I turned my attention to the chrome frames. As you can see, they have a good amount of surface rust.

IMG_6567

A cheap alternative to using a buffing wheel to remove surface rust from chrome is to use a cleaner like Awesome and some 0000 steel wool. A lot of folks with chrome dinettes use this process to rejuvenate the chrome surfaces. Unfortunately, if this process is used over a long period of time it will dull the chrome finish. I prefer dull over rust….how about you?

IMG_6570

I had some leftover Robert Kaufman discontinued “Boomerang Beat” fabric from our Modern Craft Furniture Mfg. Co.reupholstery job that I thought would look great on these stools.

IMG_6568

The great thing about these stools is that once the upholstery is attached, the metal backing clamps it into place. It is the same for the seat bottom.

IMG_6569

Now that I’ve the upholstery on this stool just two more to go!

IMG_6572

Here they are!

IMG_6583

I am very pleased with how they turned out.

IMG_6584

img_65861-1

r-1

Dee Mfg. Corp. Bar Stools Revamp

deemnfgMel and I have been scouring the internet to find stools for our kitchen counter. We had a heck of a time finding something that was appropriate for our decor. We finally found a set of Dee Mfg. stools on eBay that we thought would look great. When they arrived the bases and cushions were separate and there was no hardware!

IMG_5964When these arrived they were pretty farm fresh. The cushions are in great shape with some character. The metal frames had a lot of surface rust.

IMG_5966The cushions are a light pink with black, gray and chartreuse accents.

IMG_5971Each of the stools still had the Dee Mfg. Corp. tags.

IMG_5965crusty and rusty but not for long…

IMG_5968When sanding pieces like this I like to use a foam sanding block. It allows you to get a in all those tough areas.

IMG_5969Here is one base done compared to one of the unrestored bases.

IMG_5970Here they are all painted and set out to dry. Once they dried I attached the bases and cushions with self tapping screws.

IMG_5972We really like the way these turned out. They are simple, but the upholstery is what makes these stools.

IMG_5978They look right at home in our kitchen.

%d bloggers like this: